SHARK ISLAND - new series of the fuel dispensers

On November 30, 2023, a new line of dispensers under the type name SHARK ISLAND was put into serial production. The new fuel dispenser is a design variant of the older version of the SHARK ISLAND dispenser, which was developed and launched on the market already in 2008 (version with a height of 1600 mm) and was sold until the middle of 2018. The new SHARK ISLAND dispenser differs from its predecessor in particular by its higher height - two variants 1700mm and 2100mm - enabling a longer reach of dispensing nozzles/hoses and the use of a canopy (for the 2100mm variant). The SHARK ISLAND dispensers are designed to dispense liquid fuels such as gasoline, diesel, biodiesel, HVE, aviation gas, kerosene, light oils, etc. Depending on the type, the dispenser can deliver one or two different products from one to four dispensing hoses. Pumping performance can be standard 40-50 L/min, increased 80-90 L/min or ultra high 120-170 L/min depending on the used hydraulics, dispensing hoses and nozzles. The dispensers are using TATSUNO standard illuminated hydraulics, i.e. long life pump and and high accuracy meter and the latest PDEX5 electronic counter with IFSF LON communication capability.

                                             

SHARK ISLAND is produced in the following basic variants:

• 2100mm variant with canopy and 1 or 2 nozzles on side (marked -S)
• 2100mm variant with canopy and 1 to 4 nozzles from the front (display side)
• 1700mm variant with 1 or 2 nozzles on side (-S)
• 1700mm variant with 1 to 4 nozzles from the front (display side)
• 1700mm variant with hose springs (-HS) and 1 or 2 nozzles on side (-S)
• 1700mm variant with hose springs (-HS) and 1 to 2 nozzles from the front (display side)

 

2100mm with nozzles on side (BMP2022.SID/2100-S)	2100mm with front nozzles  (BMP2024.SID/2100)
1700mm with nozzles on side (BMP2022.SID/1700-S)	1700mm with front nozzles (BMP2024.SID/1700)
1700mm with nozzles on side and hose springs (masts) (BMP2022.SID/1700-HS-S)	1700mm with front nozzles and hose springs (masts) (BMP2024.SID/1700-HS)

Details of the SHARK ISLAND dispenser configuration, technical parameters, manuals and certificates can be found here.

 
Back to News list