SHARK Junior & Economy AdBlue
AdBlue® dispensers
1 to 2 hoses
AdBlue® - 32.5% aqueous urea solution, ISO 22241
height 1400 mm
2 models - Junior (1 hose), Economy (2 hoses)
two versions - with and without heating
1 to 2 hoses
AdBlue® - 32.5% aqueous urea solution, ISO 22241
height 1400 mm
2 models - Junior (1 hose), Economy (2 hoses)
two versions - with and without heating
Specifications
The fuel dispensers TATSUNO of the series SHARK Junior AdBlue® and SHARK Economy AdBlue ® serve for dispensing of the medium AdBlue® into road vehicles, especially heavy-duty trucks that run on diesel fuel, on retail and commercial outlets. They are progressive single- or double-sided fuel dispensers with one to two hoses for dispensing from either one or both sides simultaneously. The fuel dispensers are equipped with a high-quality Japanese hydraulic system TATSUNO and with a reliable electronic calculator. In areas where the ambient temperature drops below freezing, it is necessary to equip the dispensers with a thermostat, internal heating of hydraulics, dispensing hoses and nozzles, because at a temperature of about -9°C AdBlue freezes and it is decomposed. All fuel dispensers of the series SHARK Junior AdBlue® and SHARK Economy AdBlue ® are operated both in the manual mode (i.e. off-line), and in the automatic mode, where the fuel dispenser is linked with the kiosk control system and the data concerning volume, sum and price are transmitted to POS.
Dispenser's documents:
- Overview of dispenser models, dimensions
- Installation and user manuals
- ATEX certificates
- MID certificates
- EU Declaration of Conformity
Specifications
- Long life and high accurate hydraulics TATSUNO (Japan)
- Reliable electronic counter PDEX5
- LCD displays (7-6.5-5) with electronically controlled LED backlight
- Accurate pulse generators TATSUNO (Japan) with encrypted AES 128 data transfer
- Electronic totalizers and electromechanical totalizer for every dispensing nozzle
- Infra-red remote controller for dispenser setup
- Dispensing hoses and nozzles ZVA-ELAFLEX (Germany)
- Free hanging hoses with hose spring (optional)
- Proportional valves for preselection of dispensed amount/volume
- 4 or 12buttons keypad for amount/volume preselection
- Any model colour - on customers request
- Possibility to install payment terminal - on customers request
- ATEX variant with the possibility of installing the dispenser in a defined zone 2 (/Ex)
- Diagnostic line (optional)
Technical Specifications
| Flow rate: | 40 L/min - trucks and buses 10 L/min - personal cars |
| Accuracy of dispensing: | ± 0.15% (at min. delivery 5 litres) |
| Maximum pressure: | 0.35 MPa |
| Counter power supply: | 230V +10% -15%, 50Hz max.150VA |
| Power supply of the switching elements: | +24VDC |
| Operating temperature: | 0°C ÷ +50°C -20°C ÷ +50°C (with heating) |
Basic models
 |
BMP511.SD/AdB |
 |
| BMP511.SD/AdB/HT 1 hose with heating BMP511.SD/AdB/HT/Ex 1 hose with heating and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP511.SD/AdB-HS 1 hose without heating and hose spring (mast) BMP511.SD/AdB-HS/Ex 1 hose without heating with hose spring (mast) with possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP511.SD/AdB-HS/HT 1 hose with heating and hose spring (mast) BMP511.SD/AdB-HS/HT/Ex 1 hose with heating, hose spring (mast) and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SD/AdB 2 hoses without heating BMP512.SD/AdB/Ex 2 hoses without heating with possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SD/AdB/HT 2 hoses with heating BMP512.SD/AdB/HT/Ex 2 vhoses with heating and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SD/AdB-HS 2 hoses without heating, with hose springs (masts) BMP512.SD/AdB-HS/Ex 2 hoses without heating, with hose springs (masts) and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SD/AdB-HS/HT 2 hoses with heating and hose springs (masts) BMP512.SD/AdB-HS/HT/Ex 2 hoses with heating, hose springs (masts) possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SXD/AdB 2 hoses without heating BMP512.SXD/AdB/Ex 2 hoses without heating with possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SXD/AdB/HT 2 hoses with heating BMP512.SXD/AdB/HT/Ex 2 hoses with heating and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SXD/AdB-HS 2 hoses without heating, with hose springs (masts) BMP512.SXD/AdB-HS/Ex 2 hoses without heating, hose springs (masts) and possibility to install dispenser into zone 2 (ATEX) |
 |
| BMP512.SXD/AdB-HS/HT 2 hoses with heating and hose springs (masts) BMP512.SXD/AdB-HS/HT/Ex 2 hoses with heating, hose springs (masts) snf possibility to install dispenser into zone 2 (ATEX) |
